pat/Anet-SKR2
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update auf 2.92

Browse Source
This commit is contained in:
pat
2021-11-08 20:12:43 +01:00
parent b8ce414c54
commit 4a3d93a809
727 changed files with 25518 additions and 24905 deletions
Download Patch File Download Diff File Expand all files Collapse all files

13
Marlin/src/HAL/AVR/HAL.h
View File

@@ -39,6 +39,19 @@
#include <avr/interrupt.h>
#include <avr/io.h>
//
// Default graphical display delays
//
#if F_CPU >= 20000000
#define CPU_ST7920_DELAY_1 150
#define CPU_ST7920_DELAY_2 0
#define CPU_ST7920_DELAY_3 150
#elif F_CPU == 16000000
#define CPU_ST7920_DELAY_1 125
#define CPU_ST7920_DELAY_2 0
#define CPU_ST7920_DELAY_3 188
#endif
#ifndef pgm_read_ptr
// Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
// Windows Subsystem for Linux on Windows 10 as of 10/18/2019

7
Marlin/src/HAL/AVR/HAL_SPI.cpp
View File

@@ -34,7 +34,9 @@
#include "../../inc/MarlinConfig.h"
void spiBegin() {
OUT_WRITE(SD_SS_PIN, HIGH);
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);
@@ -74,7 +76,8 @@ void spiBegin() {
#elif defined(PRR0)
PRR0
#endif
, PRSPI);
, PRSPI
);
SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);

10
Marlin/src/HAL/AVR/fastio.cpp
View File

@@ -267,11 +267,11 @@ uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb
SET_WGM(5, FAST_PWM_ICRn); // Fast PWM with ICR5 as TOP
//SERIAL_ECHOLNPGM("Timer 5 Settings:");
//SERIAL_ECHOLNPAIR(" Prescaler=", prescaler);
//SERIAL_ECHOLNPAIR(" TOP=", ICR5);
//SERIAL_ECHOLNPAIR(" OCR5A=", OCR5A);
//SERIAL_ECHOLNPAIR(" OCR5B=", OCR5B);
//SERIAL_ECHOLNPAIR(" OCR5C=", OCR5C);
//SERIAL_ECHOLNPGM(" Prescaler=", prescaler);
//SERIAL_ECHOLNPGM(" TOP=", ICR5);
//SERIAL_ECHOLNPGM(" OCR5A=", OCR5A);
//SERIAL_ECHOLNPGM(" OCR5B=", OCR5B);
//SERIAL_ECHOLNPGM(" OCR5C=", OCR5C);
}
else {
// Restore the default for Timer 5

4
Marlin/src/HAL/AVR/inc/SanityCheck.h
View File

@@ -35,7 +35,7 @@
/**
* Sanity checks for Spindle / Laser PWM
*/
#if ENABLED(SPINDLE_LASER_PWM)
#if ENABLED(SPINDLE_LASER_USE_PWM)
#include "../ServoTimers.h" // Needed to check timer availability (_useTimer3)
#if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
#error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
@@ -43,7 +43,7 @@
#error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
#endif
#elif defined(SPINDLE_LASER_FREQUENCY)
#error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_PWM."
#error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_USE_PWM."
#endif
/**

20
Marlin/src/HAL/AVR/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -235,9 +238,9 @@ static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin");
inline void com_print(const uint8_t N, const uint8_t Z) {
const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
SERIAL_ECHOPAIR(" COM", AS_CHAR('0' + N));
SERIAL_ECHOPGM(" COM", AS_DIGIT(N));
SERIAL_CHAR(Z);
SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
SERIAL_ECHOPGM(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
}
void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N - WGM bit layout
@@ -247,7 +250,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
SERIAL_ECHOPAIR(" TIMER", AS_CHAR(T + '0'));
SERIAL_ECHOPGM(" TIMER", AS_DIGIT(T));
SERIAL_CHAR(L);
SERIAL_ECHO_SP(3);
@@ -259,14 +262,14 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
PWM_PRINT(*OCRVAL16);
}
SERIAL_ECHOPAIR(" WGM: ", WGM);
SERIAL_ECHOPGM(" WGM: ", WGM);
com_print(T,L);
SERIAL_ECHOPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
SERIAL_ECHOPAIR(" TCCR", AS_CHAR(T + '0'), "A: ", *TCCRA);
SERIAL_ECHOPAIR(" TCCR", AS_CHAR(T + '0'), "B: ", *TCCRB);
SERIAL_ECHOPGM(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
SERIAL_ECHOPGM(" TCCR", AS_DIGIT(T), "A: ", *TCCRA);
SERIAL_ECHOPGM(" TCCR", AS_DIGIT(T), "B: ", *TCCRB);
const uint8_t *TMSK = (uint8_t*)TIMSK(T);
SERIAL_ECHOPAIR(" TIMSK", AS_CHAR(T + '0'), ": ", *TMSK);
SERIAL_ECHOPGM(" TIMSK", AS_DIGIT(T), ": ", *TMSK);
const uint8_t OCIE = L - 'A' + 1;
if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); }
@@ -393,3 +396,4 @@ static void pwm_details(uint8_t pin) {
#endif
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)

3
Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

3
Marlin/src/HAL/AVR/pinsDebug_plus_70.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

4
Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp
View File

@@ -64,8 +64,8 @@
#include <U8glib-HAL.h>
uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
volatile uint8_t *u8g_outData, *u8g_outClock;
static uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
static volatile uint8_t *u8g_outData, *u8g_outClock;
static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin) {
u8g_outData = portOutputRegister(digitalPinToPort(dataPin));

16
Marlin/src/HAL/DUE/HAL_SPI.cpp
View File

@@ -594,18 +594,14 @@
SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
SPI_Enable(SPI0);
SET_OUTPUT(DAC0_SYNC);
SET_OUTPUT(DAC0_SYNC_PIN);
#if HAS_MULTI_EXTRUDER
SET_OUTPUT(DAC1_SYNC);
WRITE(DAC1_SYNC, HIGH);
OUT_WRITE(DAC1_SYNC_PIN, HIGH);
#endif
SET_OUTPUT(SPI_EEPROM1_CS);
SET_OUTPUT(SPI_EEPROM2_CS);
SET_OUTPUT(SPI_FLASH_CS);
WRITE(DAC0_SYNC, HIGH);
WRITE(SPI_EEPROM1_CS, HIGH);
WRITE(SPI_EEPROM2_CS, HIGH);
WRITE(SPI_FLASH_CS, HIGH);
WRITE(DAC0_SYNC_PIN, HIGH);
OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
WRITE(SD_SS_PIN, HIGH);
OUT_WRITE(SDSS, LOW);

1
Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
View File

@@ -20,7 +20,6 @@
*
*/
/**
* Based on u8g_com_msp430_hw_spi.c
*

34
Marlin/src/HAL/DUE/eeprom_flash.cpp
View File

@@ -200,9 +200,9 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM PageWrite ", page);
DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPAIR(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_ECHOLNPGM("EEPROM PageWrite ", page);
DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPGM(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_FLUSH();
// Get the page relative to the start of the EFC controller, and the EFC controller to use
@@ -246,7 +246,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ", page);
return false;
}
@@ -271,7 +271,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Write failure for page ", page);
DEBUG_ECHOLNPGM("EEPROM Write failure for page ", page);
return false;
}
@@ -287,7 +287,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
#ifdef EE_EMU_DEBUG
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
DEBUG_ECHOLNPGM("EEPROM Verify Write failure for page ", page);
ee_Dump( page, (uint32_t *)addrflash);
ee_Dump(-page, data);
@@ -306,7 +306,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
}
}
}
DEBUG_ECHOLNPAIR("--> Differing bits: ", count);
DEBUG_ECHOLNPGM("--> Differing bits: ", count);
#endif
return false;
@@ -326,9 +326,9 @@ static bool ee_PageErase(uint16_t page) {
uint32_t addrflash = uint32_t(getFlashStorage(page));
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM PageErase ", page);
DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPAIR(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_ECHOLNPGM("EEPROM PageErase ", page);
DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
DEBUG_ECHOLNPGM(" base address ", (uint32_t)getFlashStorage(0));
DEBUG_FLUSH();
// Get the page relative to the start of the EFC controller, and the EFC controller to use
@@ -371,7 +371,7 @@ static bool ee_PageErase(uint16_t page) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ",page);
return false;
}
@@ -395,7 +395,7 @@ static bool ee_PageErase(uint16_t page) {
__enable_irq();
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Erase failure for page ",page);
DEBUG_ECHOLNPGM("EEPROM Erase failure for page ",page);
return false;
}
@@ -411,7 +411,7 @@ static bool ee_PageErase(uint16_t page) {
for (i = 0; i < PageSize >> 2; i++) {
if (*aligned_src++ != 0xFFFFFFFF) {
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
DEBUG_ECHOLNPGM("EEPROM Verify Erase failure for page ",page);
ee_Dump(page, (uint32_t *)addrflash);
return false;
}
@@ -922,7 +922,7 @@ static void ee_Init() {
if (curGroup >= GroupCount) curGroup = 0;
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
DEBUG_ECHOLNPGM("EEPROM Current Group: ",curGroup);
DEBUG_FLUSH();
// Now, validate that all the other group pages are empty
@@ -932,7 +932,7 @@ static void ee_Init() {
for (int page = 0; page < PagesPerGroup; page++) {
if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on group ", grp);
DEBUG_FLUSH();
ee_PageErase(grp * PagesPerGroup + page);
}
@@ -949,14 +949,14 @@ static void ee_Init() {
}
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Active page: ", curPage);
DEBUG_ECHOLNPGM("EEPROM Active page: ", curPage);
DEBUG_FLUSH();
// Make sure the pages following the first clean one are also clean
for (int page = curPage + 1; page < PagesPerGroup; page++) {
if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
DEBUG_ECHO_START();
DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on active group ", curGroup);
DEBUG_FLUSH();
ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
ee_PageErase(curGroup * PagesPerGroup + page);

6
Marlin/src/HAL/DUE/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -64,6 +67,7 @@
#define PRINT_PORT(p)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)
@@ -86,7 +90,7 @@ bool GET_PINMODE(int8_t pin) { // 1: output, 0: input
void pwm_details(int32_t pin) {
if (pwm_status(pin)) {
uint32_t chan = g_APinDescription[pin].ulPWMChannel;
SERIAL_ECHOPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
}
}

28
Marlin/src/HAL/ESP32/HAL.cpp
View File

@@ -28,6 +28,10 @@
#include <esp_adc_cal.h>
#include <HardwareSerial.h>
#if ENABLED(USE_ESP32_TASK_WDT)
#include <esp_task_wdt.h>
#endif
#if ENABLED(WIFISUPPORT)
#include <ESPAsyncWebServer.h>
#include "wifi.h"
@@ -90,8 +94,24 @@ volatile int numPWMUsed = 0,
#endif
void HAL_init_board() {
#if ENABLED(USE_ESP32_EXIO)
HardwareSerial YSerial2(2);
void Write_EXIO(uint8_t IO, uint8_t v) {
if (ISRS_ENABLED()) {
DISABLE_ISRS();
YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100));
ENABLE_ISRS();
}
else
YSerial2.write(0x80 | (((char)v) << 5) | (IO - 100));
}
#endif
void HAL_init_board() {
#if ENABLED(USE_ESP32_TASK_WDT)
esp_task_wdt_init(10, true);
#endif
#if ENABLED(ESP3D_WIFISUPPORT)
esp3dlib.init();
#elif ENABLED(WIFISUPPORT)
@@ -127,7 +147,11 @@ void HAL_init_board() {
// Initialize the i2s peripheral only if the I2S stepper stream is enabled.
// The following initialization is performed after Serial1 and Serial2 are defined as
// their native pins might conflict with the i2s stream even when they are remapped.
TERN_(I2S_STEPPER_STREAM, i2s_init());
#if ENABLED(USE_ESP32_EXIO)
YSerial2.begin(460800 * 3, SERIAL_8N1, 16, 17);
#elif ENABLED(I2S_STEPPER_STREAM)
i2s_init();
#endif
}
void HAL_idletask() {

4
Marlin/src/HAL/ESP32/HAL.h
View File

@@ -142,6 +142,10 @@ void HAL_idletask();
inline void HAL_init() {}
void HAL_init_board();
#if ENABLED(USE_ESP32_EXIO)
void Write_EXIO(uint8_t IO, uint8_t v);
#endif
//
// Delay in cycles (used by DELAY_NS / DELAY_US)
//

6
Marlin/src/HAL/ESP32/HAL_SPI.cpp
View File

@@ -53,11 +53,9 @@ static SPISettings spiConfig;
// ------------------------
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
}
void spiInit(uint8_t spiRate) {

18
Marlin/src/HAL/ESP32/fastio.h
View File

@@ -40,13 +40,19 @@
// Set pin as input with pullup mode
#define _PULLUP(IO, v) pinMode(IO, v ? INPUT_PULLUP : INPUT)
// Read a pin wrapper
#define READ(IO) (IS_I2S_EXPANDER_PIN(IO) ? i2s_state(I2S_EXPANDER_PIN_INDEX(IO)) : digitalRead(IO))
#if ENABLED(USE_ESP32_EXIO)
// Read a pin wrapper
#define READ(IO) digitalRead(IO)
// Write to a pin wrapper
#define WRITE(IO, v) (IO >= 100 ? Write_EXIO(IO, v) : digitalWrite(IO, v))
#else
// Read a pin wrapper
#define READ(IO) (IS_I2S_EXPANDER_PIN(IO) ? i2s_state(I2S_EXPANDER_PIN_INDEX(IO)) : digitalRead(IO))
// Write to a pin wrapper
#define WRITE(IO, v) (IS_I2S_EXPANDER_PIN(IO) ? i2s_write(I2S_EXPANDER_PIN_INDEX(IO), v) : digitalWrite(IO, v))
#endif
// Write to a pin wrapper
#define WRITE(IO, v) (IS_I2S_EXPANDER_PIN(IO) ? i2s_write(I2S_EXPANDER_PIN_INDEX(IO), v) : digitalWrite(IO, v))
// Set pin as input wrapper
// Set pin as input wrapper (0x80 | (v << 5) | (IO - 100))
#define SET_INPUT(IO) _SET_INPUT(IO)
// Set pin as input with pullup wrapper

3
Marlin/src/HAL/ESP32/i2s.cpp
View File

@@ -23,6 +23,8 @@
#include "../../inc/MarlinConfigPre.h"
#if DISABLED(USE_ESP32_EXIO)
#include "i2s.h"
#include "../shared/Marduino.h"
@@ -340,4 +342,5 @@ void i2s_push_sample() {
dma.current[dma.rw_pos++] = i2s_port_data;
}
#endif // !USE_ESP32_EXIO
#endif // ARDUINO_ARCH_ESP32

3
Marlin/src/HAL/ESP32/spi_pins.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

2
Marlin/src/HAL/ESP32/watchdog.h
View File

@@ -25,7 +25,7 @@
extern "C" {
#endif
esp_err_t esp_task_wdt_reset();
esp_err_t esp_task_wdt_reset();
#ifdef __cplusplus
}

2
Marlin/src/HAL/ESP32/wifi.cpp
View File

@@ -59,7 +59,7 @@ void wifi_init() {
MDNS.addService("http", "tcp", 80);
SERIAL_ECHOLNPAIR("Successfully connected to WiFi with SSID '" WIFI_SSID "', hostname: '" WIFI_HOSTNAME "', IP address: ", WiFi.localIP().toString().c_str());
SERIAL_ECHOLNPGM("Successfully connected to WiFi with SSID '" WIFI_SSID "', hostname: '" WIFI_HOSTNAME "', IP address: ", WiFi.localIP().toString().c_str());
}
#endif // WIFISUPPORT

6
Marlin/src/HAL/LINUX/HAL.h
View File

@@ -63,9 +63,9 @@ uint8_t _getc();
extern MSerialT usb_serial;
#define MYSERIAL1 usb_serial
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
#define ST7920_DELAY_3 DELAY_NS(750)
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
//
// Interrupts

2
Marlin/src/HAL/LINUX/inc/SanityCheck.h
View File

@@ -26,7 +26,7 @@
*/
// Emulating RAMPS
#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
#error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
#endif

4
Marlin/src/HAL/LINUX/main.cpp
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __PLAT_LINUX__
//#define GPIO_LOGGING // Full GPIO and Positional Logging

4
Marlin/src/HAL/LINUX/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -34,6 +37,7 @@
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
// active ADC function/mode/code values for PINSEL registers

22
Marlin/src/HAL/LPC1768/HAL.h
View File

@@ -50,15 +50,9 @@ extern "C" volatile uint32_t _millis;
//
// Default graphical display delays
//
#ifndef ST7920_DELAY_1
#define ST7920_DELAY_1 DELAY_NS(600)
#endif
#ifndef ST7920_DELAY_2
#define ST7920_DELAY_2 DELAY_NS(750)
#endif
#ifndef ST7920_DELAY_3
#define ST7920_DELAY_3 DELAY_NS(750)
#endif
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
extern DefaultSerial1 USBSerial;
@@ -113,7 +107,7 @@ extern DefaultSerial1 USBSerial;
#error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
#endif
#if HAS_DGUS_LCD
#define SERIAL_GET_TX_BUFFER_FREE() MSerial0.available()
#define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.available()
#endif
#endif
@@ -162,17 +156,17 @@ int freeMemory();
using FilteredADC = LPC176x::ADC<ADC_LOWPASS_K_VALUE, ADC_MEDIAN_FILTER_SIZE>;
extern uint32_t HAL_adc_reading;
[[gnu::always_inline]] inline void HAL_start_adc(const pin_t pin) {
[[gnu::always_inline]] inline void HAL_adc_start_conversion(const pin_t pin) {
HAL_adc_reading = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits
}
[[gnu::always_inline]] inline uint16_t HAL_read_adc() {
[[gnu::always_inline]] inline uint16_t HAL_adc_get_result() {
return HAL_adc_reading;
}
#define HAL_adc_init()
#define HAL_ANALOG_SELECT(pin) FilteredADC::enable_channel(pin)
#define HAL_START_ADC(pin) HAL_start_adc(pin)
#define HAL_READ_ADC() HAL_read_adc()
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_get_result()
#define HAL_ADC_READY() (true)
// Test whether the pin is valid

2
Marlin/src/HAL/LPC1768/MarlinSerial.h
View File

@@ -46,6 +46,8 @@ public:
void end() {}
uint8_t availableForWrite(void) { /* flushTX(); */ return TX_BUFFER_SIZE; }
#if ENABLED(EMERGENCY_PARSER)
bool recv_callback(const char c) override;
#endif

42
Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp
View File

@@ -1,10 +1,9 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,12 +19,19 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Implementation of EEPROM settings in SD Card
*/
#ifdef TARGET_LPC1768
#include "../../inc/MarlinConfig.h"
#if ENABLED(SDCARD_EEPROM_EMULATION)
//#define DEBUG_SD_EEPROM_EMULATION
#include "../shared/eeprom_api.h"
#include <chanfs/diskio.h>
@@ -38,9 +44,11 @@ FATFS fat_fs;
FIL eeprom_file;
bool eeprom_file_open = false;
#define EEPROM_FILENAME "eeprom.dat"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE size_t(0x1000) // 4KiB of Emulated EEPROM
#endif
size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
bool PersistentStore::access_start() {
@@ -50,7 +58,7 @@ bool PersistentStore::access_start() {
MSC_Release_Lock();
return false;
}
FRESULT res = f_open(&eeprom_file, "eeprom.dat", FA_OPEN_ALWAYS | FA_WRITE | FA_READ);
FRESULT res = f_open(&eeprom_file, EEPROM_FILENAME, FA_OPEN_ALWAYS | FA_WRITE | FA_READ);
if (res) MSC_Release_Lock();
if (res == FR_OK) {
@@ -81,18 +89,20 @@ bool PersistentStore::access_finish() {
// This extra chit-chat goes away soon, but is helpful for now
// to see errors that are happening in read_data / write_data
static void debug_rw(const bool write, int &pos, const uint8_t *value, const size_t size, const FRESULT s, const size_t total=0) {
PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
SERIAL_CHAR(' ');
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOLNPAIR("_data(", pos, ",", value, ",", size, ", ...)");
if (total) {
SERIAL_ECHOPGM(" f_");
#if ENABLED(DEBUG_SD_EEPROM_EMULATION)
PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
SERIAL_CHAR(' ');
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOPAIR("()=", s, "\n size=", size, "\n bytes_");
SERIAL_ECHOLNPAIR_P(write ? PSTR("written=") : PSTR("read="), total);
}
else
SERIAL_ECHOLNPAIR(" f_lseek()=", s);
SERIAL_ECHOLNPGM("_data(", pos, ",", *value, ",", size, ", ...)");
if (total) {
SERIAL_ECHOPGM(" f_");
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOPGM("()=", s, "\n size=", size, "\n bytes_");
SERIAL_ECHOLNPGM_P(write ? PSTR("written=") : PSTR("read="), total);
}
else
SERIAL_ECHOLNPGM(" f_lseek()=", s);
#endif
}
// File function return codes for type FRESULT. This goes away soon, but

2
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View File

@@ -67,7 +67,7 @@ static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are in
* Test LPC176x-specific configuration values for errors at compile-time.
*/
//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
//#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
//#endif

12
Marlin/src/HAL/LPC1768/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -33,8 +36,9 @@
#define PRINT_PORT(p)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%d.%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR("_A%d "), LPC176x::pin_get_adc_channel(pin)); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 17 // space needed to be pretty if not first name assigned to a pin
// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
#ifndef M43_NEVER_TOUCH
@@ -48,6 +52,4 @@ bool GET_PINMODE(const pin_t pin) {
return LPC176x::gpio_direction(pin);
}
bool GET_ARRAY_IS_DIGITAL(const pin_t pin) {
return (!LPC176x::pin_has_adc(pin) || !LPC176x::pin_adc_enabled(pin));
}
#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)

45
Marlin/src/HAL/LPC1768/tft/tft_spi.cpp
View File

@@ -26,39 +26,22 @@
#include "tft_spi.h"
//TFT_SPI tft;
SPIClass TFT_SPI::SPIx(1);
#define TFT_CS_H WRITE(TFT_CS_PIN, HIGH)
#define TFT_CS_L WRITE(TFT_CS_PIN, LOW)
#define TFT_DC_H WRITE(TFT_DC_PIN, HIGH)
#define TFT_DC_L WRITE(TFT_DC_PIN, LOW)
#define TFT_RST_H WRITE(TFT_RESET_PIN, HIGH)
#define TFT_RST_L WRITE(TFT_RESET_PIN, LOW)
#define TFT_BLK_H WRITE(TFT_BACKLIGHT_PIN, HIGH)
#define TFT_BLK_L WRITE(TFT_BACKLIGHT_PIN, LOW)
void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET)
SET_OUTPUT(TFT_RESET_PIN);
TFT_RST_H;
OUT_WRITE(TFT_RESET_PIN, HIGH);
delay(100);
#endif
#if PIN_EXISTS(TFT_BACKLIGHT)
SET_OUTPUT(TFT_BACKLIGHT_PIN);
TFT_BLK_H;
OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
#endif
SET_OUTPUT(TFT_DC_PIN);
SET_OUTPUT(TFT_CS_PIN);
TFT_DC_H;
TFT_CS_H;
WRITE(TFT_DC_PIN, HIGH);
WRITE(TFT_CS_PIN, HIGH);
/**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
@@ -97,7 +80,7 @@ void TFT_SPI::Init() {
void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
SPIx.setDataSize(DataSize);
SPIx.begin();
TFT_CS_L;
WRITE(TFT_CS_PIN, LOW);
}
uint32_t TFT_SPI::GetID() {
@@ -116,7 +99,7 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
SPIx.setDataSize(DATASIZE_8BIT);
SPIx.setClock(SPI_CLOCK_DIV64);
SPIx.begin();
TFT_CS_L;
WRITE(TFT_CS_PIN, LOW);
WriteReg(Reg);
LOOP_L_N(i, 4) {
@@ -131,21 +114,15 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
return data >> 7;
}
bool TFT_SPI::isBusy() {
return false;
}
bool TFT_SPI::isBusy() { return false; }
void TFT_SPI::Abort() {
DataTransferEnd();
}
void TFT_SPI::Abort() { DataTransferEnd(); }
void TFT_SPI::Transmit(uint16_t Data) {
SPIx.transfer(Data);
}
void TFT_SPI::Transmit(uint16_t Data) { SPIx.transfer(Data); }
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin(DATASIZE_16BIT); //16
TFT_DC_H;
DataTransferBegin(DATASIZE_16BIT);
WRITE(TFT_DC_PIN, HIGH);
SPIx.dmaSend(Data, Count, MemoryIncrease);
DataTransferEnd();
}

6
Marlin/src/HAL/NATIVE_SIM/HAL.h
View File

@@ -99,9 +99,9 @@ extern MSerialT serial_stream_3;
#endif
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
#define ST7920_DELAY_3 DELAY_NS(750)
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
//
// Interrupts

2
Marlin/src/HAL/NATIVE_SIM/inc/SanityCheck.h
View File

@@ -26,7 +26,7 @@
*/
// Emulating RAMPS
#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
#error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
#endif

2
Marlin/src/HAL/NATIVE_SIM/pinsDebug.h
View File

@@ -20,7 +20,6 @@
/**
* Support routines for X86_64
*/
#pragma once
/**
@@ -36,6 +35,7 @@
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
// active ADC function/mode/code values for PINSEL registers

1
Marlin/src/HAL/SAMD51/QSPIFlash.h
View File

@@ -25,7 +25,6 @@
*
* Derived from Adafruit_SPIFlash class with no SdFat references
*/
#pragma once
#include <Adafruit_SPIFlashBase.h>

12
Marlin/src/HAL/SAMD51/endstop_interrupts.h
View File

@@ -162,12 +162,14 @@ void setup_endstop_interrupts() {
#error "Z_MIN_PROBE_PIN has no EXTINT line available."
#endif
_ATTACH(Z_MIN_PROBE_PIN);
#elif HAS_I_MAX
#endif
#if HAS_I_MAX
#if !AVAILABLE_EILINE(I_MAX_PIN)
#error "I_MAX_PIN has no EXTINT line available."
#endif
attachInterrupt(I_MAX_PIN, endstop_ISR, CHANGE);
#elif HAS_I_MIN
#endif
#if HAS_I_MIN
#if !AVAILABLE_EILINE(I_MIN_PIN)
#error "I_MIN_PIN has no EXTINT line available."
#endif
@@ -178,7 +180,8 @@ void setup_endstop_interrupts() {
#error "J_MAX_PIN has no EXTINT line available."
#endif
attachInterrupt(J_MAX_PIN, endstop_ISR, CHANGE);
#elif HAS_J_MIN
#endif
#if HAS_J_MIN
#if !AVAILABLE_EILINE(J_MIN_PIN)
#error "J_MIN_PIN has no EXTINT line available."
#endif
@@ -189,7 +192,8 @@ void setup_endstop_interrupts() {
#error "K_MAX_PIN has no EXTINT line available."
#endif
attachInterrupt(K_MAX_PIN, endstop_ISR, CHANGE);
#elif HAS_K_MIN
#endif
#if HAS_K_MIN
#if !AVAILABLE_EILINE(K_MIN_PIN)
#error "K_MIN_PIN has no EXTINT line available."
#endif

3
Marlin/src/HAL/SAMD51/pinsDebug.h
View File

@@ -26,6 +26,7 @@
#define PRINT_PORT(p) do{ SERIAL_ECHOPGM(" Port: "); sprintf_P(buffer, PSTR("%c%02ld"), 'A' + g_APinDescription[p].ulPort, g_APinDescription[p].ulPin); SERIAL_ECHO(buffer); }while (0)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL)
@@ -47,7 +48,7 @@ bool GET_PINMODE(int8_t pin) { // 1: output, 0: input
void pwm_details(int32_t pin) {
if (pwm_status(pin)) {
//uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
//SERIAL_ECHOPAIR("PWM = ", duty);
//SERIAL_ECHOPGM("PWM = ", duty);
}
}

14
Marlin/src/HAL/STM32/HAL.h
View File

@@ -37,6 +37,13 @@
#include <stdint.h>
//
// Default graphical display delays
//
#define CPU_ST7920_DELAY_1 300
#define CPU_ST7920_DELAY_2 40
#define CPU_ST7920_DELAY_3 340
//
// Serial Ports
//
@@ -176,8 +183,13 @@ static inline int freeMemory() {
#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT)
#ifdef ADC_RESOLUTION
#define HAL_ADC_RESOLUTION ADC_RESOLUTION
#else
#define HAL_ADC_RESOLUTION 12
#endif
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION ADC_RESOLUTION // 12
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true

4
Marlin/src/HAL/STM32/HAL_SPI.cpp
View File

@@ -47,7 +47,9 @@ static SPISettings spiConfig;
#include "../shared/Delay.h"
void spiBegin(void) {
OUT_WRITE(SD_SS_PIN, HIGH);
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SCK_PIN, HIGH);
SET_INPUT(SD_MISO_PIN);
OUT_WRITE(SD_MOSI_PIN, HIGH);

1
Marlin/src/HAL/STM32/MarlinSPI.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#if defined(HAL_STM32) && !defined(STM32H7xx)

4
Marlin/src/HAL/STM32/MarlinSerial.cpp
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

3
Marlin/src/HAL/STM32/MarlinSerial.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

1
Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

1
Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

16
Marlin/src/HAL/STM32/eeprom_flash.cpp
View File

@@ -133,7 +133,7 @@ bool PersistentStore::access_start() {
// load current settings
uint8_t *eeprom_data = (uint8_t *)SLOT_ADDRESS(current_slot);
for (int i = 0; i < MARLIN_EEPROM_SIZE; i++) ram_eeprom[i] = eeprom_data[i];
DEBUG_ECHOLNPAIR("EEPROM loaded from slot ", current_slot, ".");
DEBUG_ECHOLNPGM("EEPROM loaded from slot ", current_slot, ".");
}
eeprom_data_written = false;
}
@@ -179,9 +179,9 @@ bool PersistentStore::access_finish() {
ENABLE_ISRS();
TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
if (status != HAL_OK) {
DEBUG_ECHOLNPAIR("HAL_FLASHEx_Erase=", status);
DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPAIR("SectorError=", SectorError);
DEBUG_ECHOLNPGM("HAL_FLASHEx_Erase=", status);
DEBUG_ECHOLNPGM("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPGM("SectorError=", SectorError);
LOCK_FLASH();
return false;
}
@@ -204,9 +204,9 @@ bool PersistentStore::access_finish() {
offset += sizeof(uint32_t);
}
else {
DEBUG_ECHOLNPAIR("HAL_FLASH_Program=", status);
DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPAIR("address=", address);
DEBUG_ECHOLNPGM("HAL_FLASH_Program=", status);
DEBUG_ECHOLNPGM("GetError=", HAL_FLASH_GetError());
DEBUG_ECHOLNPGM("address=", address);
success = false;
break;
}
@@ -216,7 +216,7 @@ bool PersistentStore::access_finish() {
if (success) {
eeprom_data_written = false;
DEBUG_ECHOLNPAIR("EEPROM saved to slot ", current_slot, ".");
DEBUG_ECHOLNPGM("EEPROM saved to slot ", current_slot, ".");
}
return success;

1
Marlin/src/HAL/STM32/eeprom_if_iic.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

1
Marlin/src/HAL/STM32/eeprom_sdcard.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

1
Marlin/src/HAL/STM32/fast_pwm.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

2
Marlin/src/HAL/STM32/inc/SanityCheck.h
View File

@@ -24,7 +24,7 @@
/**
* Test STM32-specific configuration values for errors at compile-time.
*/
//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
//#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
// #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
//#endif

6
Marlin/src/HAL/STM32/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -109,6 +112,7 @@ const XrefInfo pin_xref[] PROGMEM = {
#define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL)
#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num) // must use Arduino pin numbers when doing reads
#define PRINT_PIN(Q)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PORT(ANUM) port_print(ANUM)
#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1 // will report analog pin number in the print port routine
#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num
@@ -236,7 +240,7 @@ void pwm_details(const pin_t Ard_num) {
if (over_7) pin_number -= 8;
uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F;
SERIAL_ECHOPAIR("Alt Function: ", alt_func);
SERIAL_ECHOPGM("Alt Function: ", alt_func);
if (alt_func < 10) SERIAL_CHAR(' ');
SERIAL_ECHOPGM(" - ");
switch (alt_func) {

3
Marlin/src/HAL/STM32/spi_pins.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

1
Marlin/src/HAL/STM32/tft/tft_fsmc.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../platforms.h"
#ifdef HAL_STM32

4
Marlin/src/HAL/STM32/tft/tft_ltdc.cpp
View File

@@ -183,7 +183,7 @@ void LTDC_Config() {
hltdc_F.Init.AccumulatedVBP = (LTDC_LCD_VSYNC + LTDC_LCD_VBP - 1);
hltdc_F.Init.AccumulatedActiveH = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP - 1);
hltdc_F.Init.AccumulatedActiveW = (TFT_WIDTH + LTDC_LCD_HSYNC + LTDC_LCD_HBP - 1);
hltdc_F.Init.TotalHeight = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP + LTDC_LCD_VFP - 1);
hltdc_F.Init.TotalHeigh = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP + LTDC_LCD_VFP - 1);
hltdc_F.Init.TotalWidth = (TFT_WIDTH + LTDC_LCD_HSYNC + LTDC_LCD_HBP + LTDC_LCD_HFP - 1);
/* Configure R,G,B component values for LCD background color : all black background */
@@ -205,7 +205,7 @@ void LTDC_Config() {
pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
/* Start Address configuration : frame buffer is located at SDRAM memory */
pLayerCfg.FBStartAddress = (uint32_t)(FRAME_BUFFER_ADDRESS);
pLayerCfg.FBStartAdress = (uint32_t)(FRAME_BUFFER_ADDRESS);
/* Alpha constant (255 == totally opaque) */
pLayerCfg.Alpha = 255;

1
Marlin/src/HAL/STM32/tft/tft_spi.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../platforms.h"
#ifdef HAL_STM32

1
Marlin/src/HAL/STM32/tft/xpt2046.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../platforms.h"
#ifdef HAL_STM32

7
Marlin/src/HAL/STM32/usb_host.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32
@@ -88,9 +89,9 @@ void USBHost::setUsbTaskState(uint8_t state) {
capacity = info.capacity.block_nbr / 2000;
block_size = info.capacity.block_size;
block_count = info.capacity.block_nbr;
// SERIAL_ECHOLNPAIR("info.capacity.block_nbr : %ld\n", info.capacity.block_nbr);
// SERIAL_ECHOLNPAIR("info.capacity.block_size: %d\n", info.capacity.block_size);
// SERIAL_ECHOLNPAIR("capacity : %d MB\n", capacity);
//SERIAL_ECHOLNPGM("info.capacity.block_nbr : %ld\n", info.capacity.block_nbr);
//SERIAL_ECHOLNPGM("info.capacity.block_size: %d\n", info.capacity.block_size);
//SERIAL_ECHOLNPGM("capacity : %d MB\n", capacity);
}
};

4
Marlin/src/HAL/STM32/usb_serial.cpp
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

3
Marlin/src/HAL/STM32/usb_serial.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

1
Marlin/src/HAL/STM32/watchdog.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../platforms.h"
#ifdef HAL_STM32

2
Marlin/src/HAL/STM32F1/HAL.cpp
View File

@@ -437,7 +437,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
case POWER_MONITOR_VOLTAGE_PIN: pin_index = POWERMON_VOLTS; break;
#endif
}
HAL_adc_result = (HAL_adc_results[(int)pin_index] >> 2) & 0x3FF; // shift to get 10 bits only.
HAL_adc_result = HAL_adc_results[(int)pin_index] >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits
}
uint16_t HAL_adc_get_result() { return HAL_adc_result; }

14
Marlin/src/HAL/STM32F1/HAL.h
View File

@@ -51,6 +51,13 @@
// Defines
// ------------------------
//
// Default graphical display delays
//
#define CPU_ST7920_DELAY_1 300
#define CPU_ST7920_DELAY_2 40
#define CPU_ST7920_DELAY_3 340
#ifndef STM32_FLASH_SIZE
#if ANY(MCU_STM32F103RE, MCU_STM32F103VE, MCU_STM32F103ZE)
#define STM32_FLASH_SIZE 512
@@ -230,8 +237,13 @@ static inline int freeMemory() {
void HAL_adc_init();
#ifdef ADC_RESOLUTION
#define HAL_ADC_RESOLUTION ADC_RESOLUTION
#else
#define HAL_ADC_RESOLUTION 12
#endif
#define HAL_ADC_VREF 3.3
#define HAL_ADC_RESOLUTION 10
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true

4
Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../../inc/MarlinConfig.h"

5
Marlin/src/HAL/STM32F1/eeprom_wired.cpp
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -44,7 +47,7 @@ bool PersistentStore::access_start() {
SET_OUTPUT(BOARD_SPI1_SCK_PIN);
SET_OUTPUT(BOARD_SPI1_MOSI_PIN);
SET_INPUT(BOARD_SPI1_MISO_PIN);
SET_OUTPUT(SPI_EEPROM1_CS);
SET_OUTPUT(SPI_EEPROM1_CS_PIN);
#endif
spiInit(0);
#endif

2
Marlin/src/HAL/STM32F1/onboard_sd.cpp
View File

@@ -158,7 +158,7 @@ static void sd_power_on() {
ONBOARD_SD_SPI.begin();
ONBOARD_SD_SPI.setBitOrder(MSBFIRST);
ONBOARD_SD_SPI.setDataMode(SPI_MODE0);
OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH); // Set CS# high
CS_HIGH();
}
// Disable SPI function

4
Marlin/src/HAL/STM32F1/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -41,6 +44,7 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS];
#define pwm_status(pin) PWM_PIN(pin)
#define digitalRead_mod(p) extDigitalRead(p)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PORT(p) print_port(p)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define MULTI_NAME_PAD 21 // space needed to be pretty if not first name assigned to a pin

3
Marlin/src/HAL/STM32F1/spi_pins.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

48
Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
View File

@@ -26,36 +26,20 @@
#include "tft_spi.h"
// TFT_SPI tft;
SPIClass TFT_SPI::SPIx(1);
#define TFT_CS_H OUT_WRITE(TFT_CS_PIN, HIGH)
#define TFT_CS_L OUT_WRITE(TFT_CS_PIN, LOW)
#define TFT_DC_H OUT_WRITE(TFT_DC_PIN, HIGH)
#define TFT_DC_L OUT_WRITE(TFT_DC_PIN, LOW)
#define TFT_RST_H OUT_WRITE(TFT_RST_PIN, HIGH)
#define TFT_RST_L OUT_WRITE(TFT_RST_PIN, LOW)
#define TFT_BLK_H OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH)
#define TFT_BLK_L OUT_WRITE(TFT_BACKLIGHT_PIN, LOW)
void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET)
// OUT_WRITE(TFT_RESET_PIN, HIGH);
TFT_RST_H;
OUT_WRITE(TFT_RST_PIN, HIGH);
delay(100);
#endif
#if PIN_EXISTS(TFT_BACKLIGHT)
// OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
TFT_BLK_H;
OUT_WRITE(TFT_BACKLIGHT_PIN, HIGH);
#endif
TFT_DC_H;
TFT_CS_H;
OUT_WRITE(TFT_DC_PIN, HIGH);
OUT_WRITE(TFT_CS_PIN, HIGH);
/**
* STM32F1 APB2 = 72MHz, APB1 = 36MHz, max SPI speed of this MCU if 18Mhz
@@ -87,7 +71,7 @@ void TFT_SPI::Init() {
void TFT_SPI::DataTransferBegin(uint16_t DataSize) {
SPIx.setDataSize(DataSize);
SPIx.begin();
TFT_CS_L;
OUT_WRITE(TFT_CS_PIN, LOW);
}
#ifdef TFT_DEFAULT_DRIVER
@@ -129,28 +113,16 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
#endif
}
bool TFT_SPI::isBusy() {
return false;
}
bool TFT_SPI::isBusy() { return false; }
void TFT_SPI::Abort() {
DataTransferEnd();
}
void TFT_SPI::Abort() { DataTransferEnd(); }
void TFT_SPI::Transmit(uint16_t Data) {
SPIx.send(Data);
}
void TFT_SPI::Transmit(uint16_t Data) { SPIx.send(Data); }
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
DataTransferBegin();
TFT_DC_H;
if (MemoryIncrease == DMA_MINC_ENABLE) {
SPIx.dmaSend(Data, Count, true);
}
else {
SPIx.dmaSend(Data, Count, false);
}
OUT_WRITE(TFT_DC_PIN, HIGH);
SPIx.dmaSend(Data, Count, MemoryIncrease == DMA_MINC_ENABLE);
DataTransferEnd();
}

6
Marlin/src/HAL/TEENSY31_32/HAL.h
View File

@@ -36,9 +36,9 @@
#include <stdint.h>
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
#define ST7920_DELAY_3 DELAY_NS(750)
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
//#undef MOTHERBOARD
//#define MOTHERBOARD BOARD_TEENSY31_32

5
Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
View File

@@ -36,10 +36,9 @@ static SPISettings spiConfig;
// Initialize SPI bus
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);

4
Marlin/src/HAL/TEENSY31_32/eeprom.cpp
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -16,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __MK20DX256__
/**

6
Marlin/src/HAL/TEENSY35_36/HAL.h
View File

@@ -37,9 +37,9 @@
#include <stdint.h>
#include <util/atomic.h>
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
#define ST7920_DELAY_3 DELAY_NS(750)
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Defines

5
Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
View File

@@ -36,10 +36,9 @@
static SPISettings spiConfig;
void spiBegin() {
#if !PIN_EXISTS(SD_SS)
#error "SD_SS_PIN not defined!"
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(SD_MOSI_PIN);

3
Marlin/src/HAL/TEENSY35_36/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or

6
Marlin/src/HAL/TEENSY40_41/HAL.h
View File

@@ -41,9 +41,9 @@
#include "../../feature/ethernet.h"
#endif
//#define ST7920_DELAY_1 DELAY_NS(600)
//#define ST7920_DELAY_2 DELAY_NS(750)
//#define ST7920_DELAY_3 DELAY_NS(750)
#define CPU_ST7920_DELAY_1 600
#define CPU_ST7920_DELAY_2 750
#define CPU_ST7920_DELAY_3 750
// ------------------------
// Defines

7
Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
View File

@@ -51,12 +51,9 @@ static SPISettings spiConfig;
// ------------------------
void spiBegin() {
#ifndef SD_SS_PIN
#error "SD_SS_PIN is not defined!"
#if PIN_EXISTS(SD_SS)
OUT_WRITE(SD_SS_PIN, HIGH);
#endif
OUT_WRITE(SD_SS_PIN, HIGH);
//SET_OUTPUT(SD_SCK_PIN);
//SET_INPUT(SD_MISO_PIN);
//SET_OUTPUT(SD_MOSI_PIN);

4
Marlin/src/HAL/TEENSY40_41/pinsDebug.h
View File

@@ -2,6 +2,9 @@
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
@@ -30,6 +33,7 @@
#define PRINT_PORT(p)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d) "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)

7
Marlin/src/HAL/shared/Delay.cpp
View File

@@ -19,6 +19,7 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "Delay.h"
#include "../../inc/MarlinConfig.h"
@@ -110,16 +111,16 @@
auto report_call_time = [](PGM_P const name, PGM_P const unit, const uint32_t cycles, const uint32_t total, const bool do_flush=true) {
SERIAL_ECHOPGM("Calling ");
SERIAL_ECHOPGM_P(name);
SERIAL_ECHOLNPAIR(" for ", cycles);
SERIAL_ECHOLNPGM(" for ", cycles);
SERIAL_ECHOPGM_P(unit);
SERIAL_ECHOLNPAIR(" took: ", total);
SERIAL_ECHOLNPGM(" took: ", total);
SERIAL_ECHOPGM_P(unit);
if (do_flush) SERIAL_FLUSHTX();
};
uint32_t s, e;
SERIAL_ECHOLNPAIR("Computed delay calibration value: ", ASM_CYCLES_PER_ITERATION);
SERIAL_ECHOLNPGM("Computed delay calibration value: ", ASM_CYCLES_PER_ITERATION);
SERIAL_FLUSH();
// Display the results of the calibration above
constexpr uint32_t testValues[] = { 1, 5, 10, 20, 50, 100, 150, 200, 350, 500, 750, 1000 };

2
Marlin/src/HAL/shared/Marduino.h
View File

@@ -83,7 +83,7 @@
#endif
#ifndef FORCE_INLINE
#define FORCE_INLINE inline __attribute__((always_inline))
#define FORCE_INLINE __attribute__((always_inline)) inline
#endif
#include "progmem.h"

12
Marlin/src/HAL/shared/eeprom_if_spi.cpp
View File

@@ -49,8 +49,8 @@ static void _eeprom_begin(uint8_t * const pos, const uint8_t cmd) {
(unsigned(pos) >> 8) & 0xFF, // Address High
unsigned(pos) & 0xFF // Address Low
};
WRITE(SPI_EEPROM1_CS, HIGH); // Usually free already
WRITE(SPI_EEPROM1_CS, LOW); // Activate the Bus
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Usually free already
WRITE(SPI_EEPROM1_CS_PIN, LOW); // Activate the Bus
spiSend(SPI_CHAN_EEPROM1, eeprom_temp, 3);
// Leave the Bus in-use
}
@@ -60,23 +60,23 @@ uint8_t eeprom_read_byte(uint8_t *pos) {
const uint8_t v = spiRec(SPI_CHAN_EEPROM1); // After READ a value sits on the Bus
WRITE(SPI_EEPROM1_CS, HIGH); // Done with device
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Done with device
return v;
}
void eeprom_write_byte(uint8_t *pos, uint8_t value) {
const uint8_t eeprom_temp = CMD_WREN;
WRITE(SPI_EEPROM1_CS, LOW);
WRITE(SPI_EEPROM1_CS_PIN, LOW);
spiSend(SPI_CHAN_EEPROM1, &eeprom_temp, 1); // Write Enable
WRITE(SPI_EEPROM1_CS, HIGH); // Done with the Bus
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Done with the Bus
delay(1); // For a small amount of time
_eeprom_begin(pos, CMD_WRITE); // Set write address and begin transmission
spiSend(SPI_CHAN_EEPROM1, value); // Send the value to be written
WRITE(SPI_EEPROM1_CS, HIGH); // Done with the Bus
WRITE(SPI_EEPROM1_CS_PIN, HIGH); // Done with the Bus
delay(EEPROM_WRITE_DELAY); // Give page write time to complete
}