defaulting to 91 fw

inverting x/y
changing hotendfan port

Marlin/src/gcode/gcode.h

@@ -21,6 +21,10 @@
  */
 #pragma once
 
+/**
+ * gcode.h - Temporary container for all gcode handlers
+ */
+
 /**
  * -----------------
  * G-Codes in Marlin
@@ -192,7 +196,6 @@
  * M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
  * M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
  * M281 - Set servo min|max position: "M281 P<index> L<min> U<max>". (Requires EDITABLE_SERVO_ANGLES)
- * M282 - Detach servo: "M282 P<index>". (Requires SERVO_DETACH_GCODE)
  * M290 - Babystepping (Requires BABYSTEPPING)
  * M300 - Play beep sound S<frequency Hz> P<duration ms>
  * M301 - Set PID parameters P I and D. (Requires PIDTEMP)
@@ -239,7 +242,6 @@
  * M553 - Get or set IP netmask. (Requires enabled Ethernet port)
  * M554 - Get or set IP gateway. (Requires enabled Ethernet port)
  * M569 - Enable stealthChop on an axis. (Requires at least one _DRIVER_TYPE to be TMC2130/2160/2208/2209/5130/5160)
- * M575 - Change the serial baud rate. (Requires BAUD_RATE_GCODE)
  * M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires ADVANCED_PAUSE_FEATURE)
  * M603 - Configure filament change: "M603 T<tool> U<unload_length> L<load_length>". (Requires ADVANCED_PAUSE_FEATURE)
  * M605 - Set Dual X-Carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
@@ -296,7 +298,6 @@
  * M997 - Perform in-application firmware update
  * M999 - Restart after being stopped by error
  * D... - Custom Development G-code. Add hooks to 'gcode_D.cpp' for developers to test features. (Requires MARLIN_DEV_MODE)
- *        D576 - Set buffer monitoring options. (Requires BUFFER_MONITORING)
  *
  * "T" Codes
  *
@@ -380,14 +381,6 @@ public:
     return ELAPSED(ms, previous_move_ms + stepper_inactive_time);
   }
 
-  static void report_echo_start(const bool forReplay);
-  static void report_heading(const bool forReplay, PGM_P const pstr, const bool eol=true);
-  static inline void report_heading_etc(const bool forReplay, PGM_P const pstr, const bool eol=true) {
-    report_heading(forReplay, pstr, eol);
-    report_echo_start(forReplay);
-  }
-  static void say_units();
-
   static int8_t get_target_extruder_from_command();
   static int8_t get_target_e_stepper_from_command();
   static void get_destination_from_command();
@@ -443,8 +436,6 @@ public:
 
 private:
 
-  friend class MarlinSettings;
-
   #if ENABLED(MARLIN_DEV_MODE)
     static void D(const int16_t dcode);
   #endif
@@ -525,7 +516,6 @@ private:
 
   #if ENABLED(Z_STEPPER_AUTO_ALIGN)
     static void M422();
-    static void M422_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(ASSISTED_TRAMMING)
@@ -670,7 +660,6 @@ private:
 
   static void M85();
   static void M92();
-  static void M92_report(const bool forReplay=true, const int8_t e=-1);
 
   #if ENABLED(M100_FREE_MEMORY_WATCHER)
     static void M100();
@@ -750,12 +739,10 @@ private:
 
   #if PREHEAT_COUNT
     static void M145();
-    static void M145_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(TEMPERATURE_UNITS_SUPPORT)
     static void M149();
-    static void M149_report(const bool forReplay=true);
   #endif
 
   #if HAS_COLOR_LEDS
@@ -781,51 +768,37 @@ private:
     #endif
   #endif
 
-  #if DISABLED(NO_VOLUMETRICS)
-    static void M200();
-    static void M200_report(const bool forReplay=true);
-  #endif
+  static void M200();
   static void M201();
-  static void M201_report(const bool forReplay=true);
 
   #if 0
     static void M202(); // Not used for Sprinter/grbl gen6
   #endif
 
   static void M203();
-  static void M203_report(const bool forReplay=true);
   static void M204();
-  static void M204_report(const bool forReplay=true);
   static void M205();
-  static void M205_report(const bool forReplay=true);
 
   #if HAS_M206_COMMAND
     static void M206();
-    static void M206_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(FWRETRACT)
     static void M207();
-    static void M207_report(const bool forReplay=true);
     static void M208();
-    static void M208_report(const bool forReplay=true);
     #if ENABLED(FWRETRACT_AUTORETRACT)
       static void M209();
-      static void M209_report(const bool forReplay=true);
     #endif
   #endif
 
   static void M211();
-  static void M211_report(const bool forReplay=true);
 
   #if HAS_MULTI_EXTRUDER
     static void M217();
-    static void M217_report(const bool forReplay=true);
   #endif
 
   #if HAS_HOTEND_OFFSET
     static void M218();
-    static void M218_report(const bool forReplay=true);
   #endif
 
   static void M220();
@@ -844,12 +817,10 @@ private:
 
   #if HAS_LCD_CONTRAST
     static void M250();
-    static void M250_report(const bool forReplay=true);
   #endif
 
   #if HAS_LCD_BRIGHTNESS
     static void M256();
-    static void M256_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(EXPERIMENTAL_I2CBUS)
@@ -861,10 +832,6 @@ private:
     static void M280();
     #if ENABLED(EDITABLE_SERVO_ANGLES)
       static void M281();
-      static void M281_report(const bool forReplay=true);
-    #endif
-    #if ENABLED(SERVO_DETACH_GCODE)
-      static void M282();
     #endif
   #endif
 
@@ -878,7 +845,6 @@ private:
 
   #if ENABLED(PIDTEMP)
     static void M301();
-    static void M301_report(const bool forReplay=true, const int8_t eindex=-1);
   #endif
 
   #if ENABLED(PREVENT_COLD_EXTRUSION)
@@ -891,7 +857,6 @@ private:
 
   #if ENABLED(PIDTEMPBED)
     static void M304();
-    static void M304_report(const bool forReplay=true);
   #endif
 
   #if HAS_USER_THERMISTORS
@@ -900,7 +865,6 @@ private:
 
   #if ENABLED(PIDTEMPCHAMBER)
     static void M309();
-    static void M309_report(const bool forReplay=true);
   #endif
 
   #if HAS_MICROSTEPS
@@ -949,23 +913,19 @@ private:
 
   #if HAS_FILAMENT_SENSOR
     static void M412();
-    static void M412_report(const bool forReplay=true);
   #endif
 
   #if HAS_MULTI_LANGUAGE
     static void M414();
-    static void M414_report(const bool forReplay=true);
   #endif
 
   #if HAS_LEVELING
     static void M420();
-    static void M420_report(const bool forReplay=true);
     static void M421();
   #endif
 
   #if ENABLED(BACKLASH_GCODE)
     static void M425();
-    static void M425_report(const bool forReplay=true);
   #endif
 
   #if HAS_M206_COMMAND
@@ -1010,16 +970,8 @@ private:
 
   #if HAS_ETHERNET
     static void M552();
-    static void M552_report();
     static void M553();
-    static void M553_report();
     static void M554();
-    static void M554_report();
-  #endif
-
-  #if HAS_STEALTHCHOP
-    static void M569();
-    static void M569_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(BAUD_RATE_GCODE)
@@ -1029,7 +981,6 @@ private:
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     static void M600();
     static void M603();
-    static void M603_report(const bool forReplay=true);
   #endif
 
   #if HAS_DUPLICATION_MODE
@@ -1038,12 +989,10 @@ private:
 
   #if IS_KINEMATIC
     static void M665();
-    static void M665_report(const bool forReplay=true);
   #endif
 
-  #if EITHER(DELTA, HAS_EXTRA_ENDSTOPS)
+  #if ENABLED(DELTA) || HAS_EXTRA_ENDSTOPS
     static void M666();
-    static void M666_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(DUET_SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
@@ -1065,12 +1014,10 @@ private:
 
   #if HAS_BED_PROBE
     static void M851();
-    static void M851_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(SKEW_CORRECTION_GCODE)
     static void M852();
-    static void M852_report(const bool forReplay=true);
   #endif
 
   #if ENABLED(I2C_POSITION_ENCODERS)
@@ -1093,24 +1040,23 @@ private:
 
   #if ENABLED(LIN_ADVANCE)
     static void M900();
-    static void M900_report(const bool forReplay=true);
   #endif
 
   #if HAS_TRINAMIC_CONFIG
     static void M122();
     static void M906();
-    static void M906_report(const bool forReplay=true);
+    #if HAS_STEALTHCHOP
+      static void M569();
+    #endif
     #if ENABLED(MONITOR_DRIVER_STATUS)
       static void M911();
       static void M912();
     #endif
     #if ENABLED(HYBRID_THRESHOLD)
       static void M913();
-      static void M913_report(const bool forReplay=true);
     #endif
     #if ENABLED(USE_SENSORLESS)
       static void M914();
-      static void M914_report(const bool forReplay=true);
     #endif
   #endif
 
@@ -1122,19 +1068,16 @@ private:
     static void M918();
   #endif
 
-  #if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM || HAS_MOTOR_CURRENT_I2C || HAS_MOTOR_CURRENT_DAC
+  #if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
     static void M907();
-    #if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
-      static void M907_report(const bool forReplay=true);
+    #if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
+      static void M908();
+      #if HAS_MOTOR_CURRENT_DAC
+        static void M909();
+        static void M910();
+      #endif
     #endif
   #endif
-  #if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_DAC
-    static void M908();
-  #endif
-  #if HAS_MOTOR_CURRENT_DAC
-    static void M909();
-    static void M910();
-  #endif
 
   #if ENABLED(SDSUPPORT)
     static void M928();
@@ -1161,7 +1104,6 @@ private:
 
   #if ENABLED(POWER_LOSS_RECOVERY)
     static void M413();
-    static void M413_report(const bool forReplay=true);
     static void M1000();
   #endif
 
@@ -1183,7 +1125,6 @@ private:
 
   #if ENABLED(CONTROLLER_FAN_EDITABLE)
     static void M710();
-    static void M710_report(const bool forReplay=true);
   #endif
 
   static void T(const int8_t tool_index);